The Antex Pipemaster Pro is designed to provide a clean and safe solution for making soldered joints of copper pipes.
The tool does not require any special fittings just standard presoldered or non-presoldered copper joints.
The Pro Tool has more than twice the power with Temperature Control of our DIY tool, the Pro with clean heads and good contact can make 1/2 joints in under 10secs. The temperature of the heads is maintained around 950 F, this enables the user to make more joints quickly and efficiently, whilst being safe and without the worry of a Naked Flame.
The advantage off temperature control is that less heat is applied to the joint, this prevents the heat build up in the pipes. The heat build up can make disassembly of systems hard work because the pipe expands into the joint, the Pro prevents the heat build up making disassembly easy. The other advantage using the temperature controlled version and preventing heat build up, is when you are using freezing tool to block the fluid flow. The lower heat build allows the user to make the joint closer to the frozen section of the pipe.
The unit is also suitable for the professional who has to make a joint but where the flame could cause more damage. (under counter tops, along skirting boards etc).
CHECK OUT THE VIDEO